Wednesday, May 27, 2026

The SDRBerry radio transceiver project

The SDRBerry is an Amateur Radio transceiver based on Software Defined Radio (SDR) technology. It was designed by Paul, PA0PHH. Instead of primarily constructing a radio from coils, capacitors, and transistors, many of the common functions are computer software. The computer used as the base component is the Raspberry Pi 5, a powerful single-board computer that is about the size of a pack of playing cards. It has USB ports, video ports, memory and a 4-core CPU.

Raspberry Pi 5

 The SDRBerry supports a number of SDR devices. The inexpensive RTL-SDR can be used for a receive-only build.  The more expensive Pluto+ SDR can be used for a transceiver in the VHF/UHF bands, and you can have more than one SDR and switch between them to extend your range.

RTL-SDR.com

 

 My build is going to use the Radioberry SDR designed by Johan, PA3GSB. It is a complete SDR that mounts on top of the Raspberry Pi 5. It supports transmit and receive from 80mtrs to 10mtrs on the Amateur Radio HF bands. It is an ALLMODE radio supporting SSB, FM and CW modes. It is also going to include a Pluto+ SDR to cover VHF/UHF to support the use of Amateur Radio satellites. 

Radioberry SDR board for Raspberry Pi

 

Those two components are the basic SDRBerry, but to complete the project for transmission you need a pre-amp to amplify the milli-watt output to about 5 watts output, and you need a filter to clean up your output to transmit only the the frequency you intend and not a bunch of spurious signals that are not legal.

This is exciting enough, but the SDRBerry goes so much further becoming a total integrated ham radio station. The Raspberry Pi 5 is powerful enough that it can run the SDRBerry software as well as other popular ham radio software all on the same Raspberry Pi computer. If you add some small external HDMI monitors, you can run satellite-tracking software, logging software, mapping, SOTA/POTA, digital-mode software (like WSJT-X and JS8Call) and it is all free software.

I hope I can describe the process such that you can build one of these terrific Ham Radio systems for yourself. 

 

 

 

No comments:

Post a Comment